[#5826] Hello LPro AIO - A10 iOS 15 without network iPhone 7/7 Plus ( iPad6th Wi-Fi supported ) {PROMO} [USDT ONLY]

📢 NEW UPDATE: NO DCSD REQUIRED for A10/A11 Devices! 🚀

🔹 DCSD is NOT needed for iPhone 7–X (A10/A11) ✅
🔹 DCSD still required for iPads & iPhone 6s/6s Plus ⚠️

🔄 AUTO METHOD (Recommended)

1️⃣ Connect device in Recovery Mode 🔄
2️⃣ Click "Boot To DFU Mode" (DO NOT SKIP) 📲
3️⃣ Click "Purple Mode" ✅ (No DCSD needed for iPhone 7–X)

• DCSD Required for iPads & iPhone 6s/6s Plus
• After writing, the device automatically enters Recovery Mode
  4️⃣ Click "Boot To DFU Mode" again (DO NOT SKIP) 🔄
  5️⃣ Click "Run PwnDFU" ▶️
  6️⃣ Click "Boot Device" 🔄
  7️⃣ Click "Check SSH" (Wait for ✔️ Check SSH) 🔍
  8️⃣ Click "HELLO BYPASS" 🎉

✅ Device Successfully Activated!

🛠️ MANUAL METHOD (For Advanced Users)

1️⃣ Connect device in Normal Mode

• Copy the Serial Number displayed 📋
  2️⃣ Connect device in Recovery Mode 🔄
  3️⃣ Click "Boot To DFU Mode" (DO NOT SKIP) 📲
  4️⃣ Click "Purple Mode" ✅
• You can connect DCSD now or close and manually connect DCSD cable
  5️⃣ Open MagicCFG (or any tool) & edit Serial copied in Step 1 🔧

⚠️ VERIFY if Serial is changed successfully. Read device info in Normal Mode to confirm.

6️⃣ Click "Hello Bypass" in Normal Mode FIRST (DO NOT SKIP)

• This checks device data before bypassing. Proceed after success message.
  7️⃣ Reconnect device in Recovery Mode 🔄
  8️⃣ Click "Boot To DFU Mode" (DO NOT SKIP) 📲
  9️⃣ Click "Run PwnDFU" ▶️
  🔟 Click "Boot Device" 🔄
  1️⃣1️⃣ Click "Check SSH" (Wait for ✔️ Check SSH) 🔍
  1️⃣2️⃣ Click "HELLO BYPASS" 🎉

✅ Device Successfully Activated!

📥 Download Tool: Click Here 🚀